POLYUREA WATER
TANK COATINGS
INDUSTRIAL
WATER TANKS
Water tanks may seem like simple systems; nothing more than gigantic water bottles that should easily contain large volumes of water or other liquids for as long as they need to be stored. The truth, however, is more complicated. As they say, “the bigger they are, the harder they fall,” and the same is true for water tanks.
THE BEST INDUSTRIAL STRENGTH
PROTECTIVE COATINGS FOR WATER TANKS
Most industrial water tanks are designed to hold very large volumes of water, which can exceed one hundred thousand gallons. This means that not only is there enormous stress placed on water tanks by virtue of the incredible quantities of water within, but that there are many more opportunities for material failure, which pose potentially catastrophic consequences. Cracks, leaks, UV degradation, or other types of damage or deterioration risk letting water out, and contaminants in. In either case, water stored in compromised water tanks may be rendered unsafe, or otherwise unsuitable for industrial or commercial use. Perhaps worse still, in the event of primary containment failure, the sudden release of large volumes of water can pose life-threatening risks to on-site personnel, as well as to surrounding infrastructure, communities, and wildlife. To protect water tanks from spills and contamination, polyurea water tank coatings offer the perfect solution.
POLYUREA
PROTECTIVE COATINGS
Polyurea spray elastomer technology uses isocyanates and a blend of synthetic resin that react on-site to form a protective coating on the surface of industrial infrastructure like water tanks. Polyurea coatings are highly resistant against most types of weathering and abrasion, and form a watertight seal that separates structural materials from anything in their local environment. They’re easily applied using high pressure spray systems, and cure rapidly for minimal downtime and a faster return to operations. Unlike many alternative coatings like epoxy, polyurea is made of 100% solids, and is solvent-free and volatile organic chemical (VOC)-free, making it safer and more sustainable. The robust physical properties and high flexibility in formulation of polyurea coatings has made it the industry’s choice for high-quality industrial coatings, which is why they’ve become almost ubiquitous in most water storage systems.
ADVANTAGES OF POLYUREA COATINGS
FOR WATER TANKS
Polyurea’s robust physical properties translate to several key advantages for water tank coatings compared to traditional coatings or coatings-free water tank systems:
Abrasion Resistance
Polyurea water tank coatings are highly abrasion resistant, easily absorbing forceful impacts or frequent physical stress that would otherwise risk damaging or degrading structural materials.
Corrosion Resistance
Polyurea coatings provide effective corrosion control, as they form a watertight barrier that separates water tank materials from the water stored within, leveraging polyurea’s high moisture resistance.
Fast Curing
Many traditional coating technologies can take up to several days to cure and stabilize. Polyurea water tank coatings cure much faster, within seconds, to see a quicker return to service and safer and more reliable water tank systems.
Flexibility
Polyurea coatings can withstand high deformation without cracking or peeling. For water tanks exposed to varied or extreme temperatures, this means that polyurea water tank coatings can more easily adapt to temperature fluctuations or movement caused by on-site accidents or natural disasters like sudden seismic activity.
FAQ FREQUENTLY ASKED QUESTIONS
Polyurea water tank coatings are highly effective at protecting water tanks from corrosion, structural damage, and leaks and cracks. However, damaged coatings are at risk of under-film corrosion, making primers and sealers highly recommended. A thorough application with careful surface preparation can make the difference between decades of protection and frequent repairs and replacements.
The requirements for storing water supplies, especially potable water, are much higher than for other types of liquid containment. Polyurea coatings are 100% solids, solvent-free, and volatile organic chemical (VOC)-free, making it a safer and more sustainable coating technology compared to traditional solutions.
Polyurea water tank coatings can be applied to either the inside or outside of water tanks. The choice will depend on the type of water and its intended use, as well as the materials used to construct the water tank and the environment that the tank is stored in. In either case, polyurea water tank coatings are a highly effective shield against contaminants, and help avoid dangerous cracks and leaks.
START YOUR OWN
COATINGS BUSINESS
The coatings industry is booming, with more opportunities than ever before to service countless industries with exceptional protective technologies. That’s why we’ve created easy and comprehensive startup packages to provide you with everything you’ll need to start your own coatings business. You’ll receive personalized on-site training, high-quality materials and spray equipment, professional certification, and lifetime technical support. With only a small initial investment, and no franchise fees or other ongoing costs, you start your new career in the coatings industry by partnering with ArmorThane. To learn more about how you can start your own coatings business, or discover the rest of ArmorThane’s polyurea and polyurethane products and services – contact us today! Our expert team of customer service and technical support staff is available 24/7 to answer any questions, and help get your business started.
