Typical Uses: This product is typically used on concrete or plywood decks and patios. 

Color & Packaging: This component comes in grey only and is packaged in 5 US gallon pails. 

Application: For best results, use a notched trowel or a squeegee to create a uniform film thickness. Apply ArmorDeck evenly over the entire deck. The application should be continuous to ensure a smooth and level coat with no lines or streaks. Allow the coating to cure for a minimum of 16 hours and a maximum of 48 hours before proceeding to subsequent coats.
It is recommended that an aggregate of washed sand, garnet abrasive, tennis ball, or rubber crumb, approximately 16 or 20 mesh, depending on skid resistance requirements, be spread onto the surface of the basecoat. Before applying the topcoat, any aggregate or material that does not adhere can be swept or blown off. It is imperative that the top coating be done within 48 hours.
For ease of application, ArmorDeck Basecoat SF should be applied in temperatures greater than 16 C (60 F).