Application Method
Typical Packaging
About ArmorFoam products
- Sprays as foam then harden to fill in cracks of varying sizes
- Most commonly used as high R-value insulation sprayed in walls, attics, and crawl spaces and hardens to block outside air and moisture, reduce utility costs, strengthen the structure
- Other uses include creating an insulating underlayment on the outside of primary containment for maintaining internal tank temperature; the tank is then coated with polyurea or polyurethane spray to form a tough outer shell
- In mining applications, expanding foam reinforces highly fractured and unfractured rock for added stability and prevents minor groundwater inflow
ArmorFoam Open Cell
(.5 PCF Core Density)
Our Standard ArmorFoam Open Cell Spray Foam is .5lbs density and offers an R-value of approximately 2 per 1-inch thickness. Open-cell foam typically has a lower density and is designated as such to allow vapor passage through the “open” cells of the material. Per Set, the open cell will cover approximately 17000 Board feet at 1-inch thick and perfect yield.
ArmorFoam Closed Cell
(2 PCF Core Density)
Our Standard ArmorFoam Closed Cell Spray Foam is a 2-pound density and offers an R-value of approximately 7 per 1-inch thickness. Closed Cell foam is typically denser, and the cells seal off from each other during the formation and cure of the foam after you spray it—these closed cells form a vapor barrier after 2 inches of thickness. Each set will cover about 5000 board feet with perfect yield.
ArmorFoam UltraThane
(4,6,8 pCF core density)
ArmorFoam UltraThane 400, 600, & 800 is a two-component, spray-in-place closed-cell, high-density polyurethane foam insulation with a nominal 4, 6, & 8 pcf core density, providing enhanced structural performance.
ArmorFoam Roof 200
(HFO/HFC Roofing Foam )
ArmorFoam Roof 200 HFC and HFO roofing spray foam is a two-component, closed cell, Class A fire-rated, spray-in-place, exterior, polyurethane foam system with nominal core density ranges 2.5 pcf, 2.7 pcf or 3.0 pcf.
ArmorFoam Lift 200
(2.50 pCF lifting foam )
ArmorFoam Lift 200 foam is a two-component, closed cell, water blown, rigid, slab-jacking foam designed to raise and stabilize concrete or asphalt in residential uses. ArmorFoam Lift 200 is a hydrophobic 2.50 pcf polyurethane polymer, which provides a fast injecting and workable repair solution for most settling problems in patio slabs, driveways, and sidewalks.
ArmorFoam Lift 300
(3.75 pCF lifting foam)
ArmorFoam Lift 300 foam is a two-component, water-blown, closed-cell, rigid slab-jacking foam designed to raise and stabilize concrete foundations for commercial and industrial uses. It is a hydrophobic 3.75 pcf polyurethane polymer that provides powerful and steady lifting for heavy slabs. ArmorFoam Lift 300 cures quickly and provides longer-lasting stability for higher dead-weight loads.
